MoveableWalls

Moveable Walls

Very nice well-built rolling moveable walls with integrated electrical outlets, built to code, electrican can daisy-chain together (wall to wall)

Dimensions:

• Walls are:
  • Height: ~84" high (from floor)
  • Length: ~98" long
  • Width/thickness:
    • Just the wall part itself is: 4.25" thick, not counting moulding around top and bottom
    • Rolling bracket / casters: stick out 7.5" from wall on ea. side.
    • Moulding:
      • 1/2" around bottom
      • 2" around top

• Other measurements:
  • Rolling bracket is 20.5" wide total (from caster on one side of the wall to the other)
  • Bottom of wall (top of rolling bracket/casters) is 5.75" off the ground
  • Wall itself, measuring from the top the rolling brackets upon which it rests, is 78. 3/8" to top of moulding

Cost & Quantity

• # walls currently avail: 8. Possibly another 4 more later.
• Cost per wall is ~ $400/wall. Seller wants $420 (already talked down from much more). Should be able to get them for $400/ea
• Total: for 8: $3200.
• Seller is Hugh (who recently donated a large plotter to sudo room). He rents part of the Berkeley Design Center, where the walls reside:
  • Berkeley Design Cetner
  • 3195 ADELINE STREET BERKELEY CA (Near Ashby BART Station)
  • hours: 10-5

Funding

• Birdhouse has given $1500 toward the cost of these walls.
• Request $1700 from Omni Commons

Rationale

• Incredibly useful for code & soundproofing